


This week I was working on the toolchanger and the fiber optic and the floatation. I printed a positive of one of the simpler floatation parts to be the first mold I make. I set the print settings to be very detailed, but the bambu labs X1 carbon sucks caca poopoo so it messed up the print. The print also had some weird polygon lines in the curves that I need to fix. I don’t know whether these are from the fusion model, the export file format, or the slicer, but they need to be fixed before I re-print the float. I also found the exact silicone to purchase for the molding process.
I split the duel strand fiber connection at the end of one of our lines into 2 and tried to plug it into the fiber to Ethernet converter that miles bought. It was the wrong style of connector so it didn’t work. I still need to do more research on how to terminate fiber to have the right connector for this component.
I am hoping to start designing the internal heat sink/mounting block for the internal electronics on BOB. I need a list of components from Miles to be able to do this.
I was also working on the tool changer for the baby mill this week. I nearly finished machining the entire assembly, however I still need to drill 3 more holes for cable management and matching the handle. Before I machine the handle, I need to find the specific rocker switch I am going to put on the end of it.
I am going to use a set of 4 relays and a 3 pole switch to allow the switch to be small while controlling a large amount of current. I made wire channels inside the tool changer assembly so that the wires can be neatly hidden.






